KEIm-08 Product Information

Hardware Specifications

The KEIm-08SoM is a System-on-Module (SoM), that is implemented Nios® ll processor and each peripherals I/F on Intel® MAX® 10 FPGA.

The FPGA on the KEIm-08SoM has been pre-designed equal function to MCU.

Each interfaces are connected to BtoB connector of 90pin.

CPU core	Nios®Ⅱ Gen2 Processor 80MHz
Cash	I-cache：4KByte、D-cache：2KByte
RAM	SDRAM　16bit　8MByte
ROM	NOR-Flash　16bit　4MByte
Connector	FX8-90P-SV1（HRS）90Pin General Purpose I/O IP provides up to 66 I/O ports
JTAG	Connector to BtoB connector.
Power supply	+3.3V single
Power consumption	T.B.D
Operating temperature	T.B.D
Dimensions	40mm × 30mm

RTL development environment	Intel® Quartus® Prime Development software
Nios® ll program development environment	Intel® Nios® ll EDS

Model : KEIM-08HED-R10

Power supply	+5V (Supply from USB bus power or pin header)
Dimensions	90mm × 55mm
Basic specification	SoM connector, USB serial, Pin header x 2, JTAG connector, Push switch x 2, DIP switch, LED x 3, etc.

Model : KEIM-DEV-R10

Power supply	+5V (AC adapter)
Dimensions	130mm × 170mm
Basic specification	JTAG connecter, RS232C, USB serial, Ethernet, EEPROM, ADC, DAC, RTC, Buzzer, etc.

You can download the following documents.

KEIm header board　Model: KEIM-08HED-R10
Hardware manual / Schematic / Parts list / Startup guide
FPGA project startup guide publication version
Project file：Nios® ll / Fast version 、 Nios® ll / Economy version
KEIm SoM Development Kit　Model: KEIM-DEV-R10
Hardware manual / Tutorial guide / Schematic / Parts list